|
|
Freedom Tuning Systems Stage 1 Tuner
|
|
Item Number: FTS1-1
Click Here To Download The Instruction Sheet
The Freedom Tuning System Stage 1 Tuner CAN bus version is compatible with 2010 to current Victory® CAN bus models. You can easily adjust your fuel injection to match the requirements of performance parts including free flowing exhausts, and low restriction air filters. You can add or subtract fuel.
Installation takes only 10-15 minutes and involves accessing four wires from the engine control module (ECM) harness to add two Deutsch connectors and connecting one ground wire. The unit is completely encapsulated and impervious to moisture. With a very low profile of only ½" and occupying a fraction of the space required by competitive products, you won’t have a problem finding a place to mount the unit.
You can use the mode and up/down pushbutton switches to make fuel trim adjustments in the RPM and throttle position ranges required by most applications without the use of any additional software or computer connections. The fuel trim value is displayed on a bright daylight readable LED display.
The Stage 1 Tuner also has an advanced mode, where you can use the optional USB interface and PC Link Tuner software to make precise fuel adjustments for the entire operating range for the front and rear cylinders independently.
***Please Note - The Freedom Tuning Systems Stage 1 Tuner utilizes Deutsch DT series connector assemblies and crimping techniques. You must use a proper crimping tool for the closed barrel terminals we suppply. We offer the proper crimping tool for purchase below.
|
Deutsch Connector Barrel Terminal Crimping Tool
| | |
Product Reviews
| (11 Ratings, 6 Reviews) |
Average Rating:
|
nice product
chris lewis
(dayton, ohio)
6/13/2016 7:52 PM
Really woke my 2015 magnum up. I have no experience working on bikes and was a little nervous about messing with the wiring on my bike . Kevin took the time to talk to me twice so that I could feel secure in what I was doing.You don't find that kind of customer service much these days . I've added a lloyds air filter , big gonzo pipes, and disconnected the O2 sensors , and K.Baxters stage 1 tuner helped me to add the right amount of fuel to eliminate around 90% of the back firing and popping caused by the factory ( lean ) settings. One thing to note for magnum owners is that the directions say that the first wire you splice into is the violet with the pink stripe , had to give Kevin a call when I saw that there were four wires like that , and he informed me that it didn't matter which one I used , and he was right. 500 miles in and I couldn't be happier.I haven't had it on a dyno yet , but I'm averaging 42.7 MPG since install.Thanks for a great product Kevin.
|
Thanks Kevin
Mario Rizzotto
(Staten Island )
2/20/2016 8:39 AM
Befor I say anything about this tuner I want to say Kevin is a good guy he answered all my quxestions and gave me his most honest answers I have this tuner in a 2015 victory magnum with victory stage 1 air filter and rcx slip ons and factory stage 1 download the tuner greatly improved my bike I do not have any declaration popping the bike does not flatten out on top end feels endless the more fuel I added the better the bike got gas mileage improved greatly it's a great product
|
This unit is all they say it is AND MORE !!
SmokeShowJoe
(Connecticut)
8/2/2015 6:19 PM
Made my 2013 CCT run like it should have from the factory. I would like to thank Kevin for making a product so well that I'm sure it will out last my bike... Do yourself a favor "get one" you won't be sorry...
|
Great product
Richard
(Sydney, Aus)
5/30/2015 11:13 AM
Simple installation, easy to adjust, and my XC rungs great. Top notch mates.
|
Your Victory tuner
Andy Corley
(Chicago, IL)
2/14/2014 5:15 PM
Awesome product. I installed it myself in about 20 mins and I took my time. Didnt hook it up to a computer and just used the settings in the instructions and made a couple changes. Runs top notch. Good job guys!
|
|
|