Twin Cam Ignition 04-up Carb Only

With a fully programmable ignition, you have many options of mode selection including initial timing, advance slope and RPM limits at 100 RPM intervals. You may also change cranking (start up) revs and rear cylinder timing offset. When developing your own advance curves, you can alter the curve at every 100 RPM step. With the use of the optional software package you will also be able to view total hours of engine run time, number of engine starts, max RPM usage and how long the motor operated there. In fact, you will be able to view your engines hourly operating times at each 500 RPM interval.

The ignition may be ordered with a fully programed specific curve or set with a basic curve ready for you to program. If you are not interested in programing you can opt for the basic generic curves without need of further programing.

*If you intend to program your system, purchase of cables and software below is required.*